帮助表单和安装说明
一系列关于当前和之前产品的帮助表单和安装说明。
请注意:这些程序只能由具备适当技能和经验的合格人员来执行。若您有任何安装疑问定,请联系之前的技术人员。
| Title | Description | Category | Download | View | Link |
|---|---|---|---|---|---|
| Brightfield Connection Options | Brightfield LED installation guide. | Light Sources | Download | ||
| Bulb Installation for the Lumen 200 Series | How to Install the Bulb in the Lumen 200 Series. | Light Sources | Download | ||
| Changing Filters in the Lumen 200 Pro Filter Wheel | The filter wheel can hold up to six 25 mm filters. | Filter Wheels, Turrets & Shutters | Download | ||
| Changing Filters on the Filter Wheels | Instructions on how to add and remove filters on the filter wheels. | Filter Wheels, Turrets & Shutters | Download | ||
| Compatibility of SMZ light bases with Prior Stages | Guide for SMZ 800, SMZ 1000, SMZ1270, and SMZ 1500 stereo microscopes from Nikon. | Motorized Stages | Download | ||
| Controlling the Lumen 300 and 1600 in Cell Sens | The Lumen 300 and 1600 can be set up via USB. | Light Sources | Download | ||
| Emission Filter Wheel Up-Kit for Nikon TE2000/Ti | Installation instructions assuming a previously purchased filter wheel. | Filter Wheels, Turrets & Shutters | Download | ||
| Filter Wheel Adjustment | Filter wheel adjustment if filter wheel is losing position. | Filter Wheels, Turrets & Shutters | Download | ||
| Filter Wheel and Shutter Adapter Installation and Handling Guide | Filter wheel and shutter adapter installation and handling for a variety of microscopes. | Filter Wheels, Turrets & Shutters | Download | ||
| Fitting A Filter Wheel and Shutter to Nikon Ti | Instructions for attaching a filter wheel and shutter to the Nikon Ti Microscope. | Filter Wheels, Turrets & Shutters | Download | ||
| Fitting Filter Wheel Board to the main PCB in the ProScan II | Guide for installing a filter wheel and shutter board to the main circuit board of the ProScan II. | Filter Wheels, Turrets & Shutters | Download | ||
| Focus Coupler Installation for Nikon 50i/80i/LV/AZ (lower) | Installation instructions for competent and qualified persons. | Focus Mechanisms | Download | ||
| Focus Coupling Installation for Nikon TsR2 | Mechanical build of the H122KTI2 focus coupling for Nikon Ts2R. | Focus Mechanisms | Download | ||
| Focus Drive Installation for Leica DML and DMR Series | Guide for installing an H122KLC motor onto Leica DML and DMR microscopes. | Focus Mechanisms | Download | ||
| Focus Drive Installation for Leica DML Series | Guide for installing a H122DM4 motor onto a Leica DMLB microscope. | Focus Mechanisms | Download | ||
| Focus Drive Installation Instructions | Focus drive installation for a variety of microscopes. | Focus Mechanisms | Download | ||
| Focus Motor Coupling for Evident/Olympus SZX, BX51 and IX71 | Installation instructions for competent and qualified persons. | Focus Mechanisms | Download | ||
| Focus Motor Coupling for Zeiss Axio Imager | Installing a focus motor coupling onto a Zeiss Axio Imager microscope. | Focus Mechanisms | |||
| Focus Motor Coupling for Zeiss Axioskop | Installing a focus motor coupling onto a Zeiss Axioskop microscope. | Focus Mechanisms | |||
| Focus Motor Coupling for Zeiss Axiovert 200 | Installing a focus motor coupling onto a Zeiss Axiovert 200 microscope. | Focus Mechanisms | |||
| Focus Motor Installation for Nikon SMZ1500 | Installation instructions for competent and qualified persons. | Focus Mechanisms | Download | ||
| Focus Motor Required Dimensions – Form | Submit this form to check if we can mount a focus motor to your microscope. | Focus Mechanisms | Download | ||
| H107N300 stage onto Nikon Diaphot and Eclipse Microscopes | Installation instructions for competent and qualified persons. | Motorized Stages | Download | ||
| H117 Installation on Nikon Ti | Instructions for adding the H117 motorized stage to a Nikon Ti microscope. | Motorized Stages | Download | ||
| H117 on Olympus IX installation | Adding the H117 motorised stage to a Olympus IX microscope. | Motorized Stages | Download | ||
| H117, H101A and ES111 Stage Limit Adjustment | Instructions on how to adjust limit switches for H117E1DM, H101A and ES111 stages. | Motorized Stages | Download | ||
| H122 Focus Drive Installation | Guide for installing the H122 Focus Drive. | Focus Mechanisms | Download | ||
| H122KON Coupler (Olympus and Nikon) | The H122KON kit allows direct coupling of the focus motor to the fine focus. Suitable for most Nikon and Olympus. | Focus Mechanisms | Download | ||
| HF108B manual for installation on to Evident/Olympus Microscopes | HF108B installation instructions for Evident/Olympus microscopes. | Filter Wheels, Turrets & Shutters | Download | ||
| HF108B manual for installation on to Nikon Microscopes | HF108B installation instructions for Nikon microscopes. | Filter Wheels, Turrets & Shutters | Download | ||
| HF110T2U Emission Wheel Up Kit for Nikon TE2000 | Assembly installation instructions for competent and qualified persons. | Filter Wheels, Turrets & Shutters | Download | ||
| HF248 Emission Wheel Up Kit for Nikon Ti Microscopes | Assembly installation instructions. Assumes installation with a previously purchased filter wheel. | Filter Wheels, Turrets & Shutters | Download | ||
| How to fit an ES107IX stage to an IX microscope | Adding the ES107IX motorized stage to an Evident/Olympus IX microscope. | Motorized Stages | Download | ||
| How to Mount a HF237 and Shutter on an Evident/Olympus IX2 | Installation instructions for competent and qualified persons. | Filter Wheels, Turrets & Shutters | Download | ||
| How to Reset a Prior Controller | The ES10ZE, OptiScan and ProScan range of controllers can be reset to default settings. | Software | Download | ||
| HZ106KT2 User Manual | Assembly instructions and user guide for the HZ106KT2 system. | Physiology Platforms | Download | ||
| ImagePro Plus-Working with the Prior Lumen Pro | Guide to install and set up the Lumen Pro within Scope-Pro. | Software | Download | ||
| Installation Instructions for PS3H122OLM Focus Motor to Olympus BX61 | Installation instructions for PS3H122OLM focus motor to Olympus BX61. | Focus Mechanisms | Download | ||
| Installation of a direct coupler for Meiji Microscopes | Guide for installing a direct coupler onto Meiji microscopes. | Focus Mechanisms | Download | ||
| Installation of flat topped stage on Evident/Olympus BX63 | Guide shows how to install the H101F flat-top stage on an Evident/Olympus BX63 microscope. | Olympus Microscopes | Download | ||
| Installing a H122DM4 motor onto a Leica DM4000 | Guide for installing a H122DM4 motor onto a Leica DM4000 microscope. | Motorized Stages | Download | ||
| Installing a Shutter on a Filter Wheel | Introduction to installing a Prior Shutter on a Prior Filter Wheel. | Filter Wheels, Turrets & Shutters | Download | ||
| Installing a Standalone Shutter | Introduction to installing a Prior Shutter as a standalone unit. | Filter Wheels, Turrets & Shutters | Download | ||
| Installing and Using Prior Terminal and Prior Demo Controller | Prior Scientific software allowing control via USB or RS232 commands. | Software | Download | ||
| Installing H101F on a Zeiss Microscope | Adding the H101F motorized stage to a Zeiss upright microscope. | Motorized Stages | Download | ||
| Installing H117 on Zeiss Axio Observer | Adding the H117 motorised stage to a Zeiss Axio Observer microscope. | Motorized Stages | |||
| Installing H117 on Zeiss Axiovert | Adding the H117 motorised stage to a Zeiss Axiovert microscope. | Motorized Stages | |||
| Installing H117 ProScan stage onto Evident IX85 Microscope | Installation procedure for the H117N1E4 ProScan stage onto an Evident/Olympus IX85 microscope. | Motorized Stages | Download | ||
| Installing HLD117 on a Nikon Ti | Instructions for adding the HLD117 motorized stage to a Nikon Ti microscope. | Motorized Stages | Download | ||
| Installing HLD117 on an Olympus IX | Adding the HLD117 motorized stage to an Olympus IX microscope. | Motorized Stages | Download | ||
| Investigating ProScan II failure of drive chips | Identify if a drive chip has failed. Only for use with the ProScan II. | Controllers & Joysticks | Download | ||
| Lumen 200 Bulb Installation (Old variants) | Old variant bulb installation. | Light Sources | Download | ||
| Lumen Adapter Focusing | When you receive your collimator it will be set up for your microscope. For fine-tuning follow these instructions. | Light Sources | Download | ||
| Meiji RZ Focus Installation Instructions | Guide for installing a PS3H122HT focus motor onto a Meiji RZ stereo microscope. | Focus Mechanisms | Download | ||
| Mounting a H101F Stage on Olympus BX | Adding the H101F motorized stage to an Evident/Olympus BX/MX microscope. | Motorized Stages | Download | ||
| Nikon Focus Drive Installation Manual | Aid to install a Prior Focus Drive onto a Nikon Ti Microscope. | Focus Mechanisms | Download | ||
| Nikon LSC for SP Series installation instructions | Installation procedure for the Prior Queensgate SP Series on a Nikon Ti ECLIPSE with Laser Safety Cover. | Focus Mechanisms | Download | ||
| OptiScan and ProScan Comparison | An at-a-glance guide to the key features and benefits of ProScan and OptiScan ranges. | Motorized Stages | Download | ||
| PF202 – PF850 Mounting on Olympus IX73 Double Deck | Step-by-step guide for installation of PF850 onto an Olympus IX73 double deck microscope. | Focus Mechanisms | Download | ||
| PF850 Laser Autofocus Installation onto Olympus IX81 Microscope | PF850 Laser Autofocus installation onto Olympus IX81 microscope. | Laser Autofocus | Download | ||
| Prior LumenLED and uManager | The Prior LumenLED can be controlled in uManager under filter wheel and shutter compatibility mode. | Software | Download | ||
| Prior Microscope Components Compatibility With Imaging Software | Prior microscope automation components are widely compatible with leading imaging software platforms. | Software | Download | ||
| PS3H122EKAXIM Encoder Bracket for Zeiss Axio Imager | Instructions to attach the encoder bracket HP1702 to the Axio Imager. | Zeiss Microscopes | Download | ||
| PS3H122FS70 Installation Instructions | PS3H122FS70 installation instructions for Mitutoyo FS70 models. | Focus Mechanisms | Download | ||
| PS3H122R Focus Motor and Direct Couplings Installation Guide | Instructions for the standard split-sleeve mounting for the focus motor on various microscopes. | Focus Mechanisms | Download | ||
| PS3H122R Installation Instructions | Also applicable to older H122 motors. | Focus Mechanisms | Download | ||
| QGOP-RAISE-KIT-TI2 Installation Instructions | Procedure for installing Prior Queensgate OP Series on the Nikon Ti2 inverted microscope. | Focus Mechanisms | Download | ||
| Re-setting your controller | Instructions for resetting ES9, ES10, H129, H130 and ProScan III controllers. | Software | Download | ||
| Reinstalling FTDI Drivers Instructions | For the ProScan III Controller. | Software | Download | ||
| Sending a RESET command to Prior controllers | How to reset your Prior controller using the Prior Terminal software. | Controllers & Joysticks | Download | ||
| Stages Installation Master Manual | Version 1, 2026 | Motorized Stages | Download | ||
| Tuning the Collimator Lens (Lumen 200 series) | Applicable to ALL versions of the Lumen 200. | Illumination | Download | ||
| USB Driver Installation Instructions for Windows 7 | Software driver installation. | Software | Download | ||
| Using a Prior Controller with uManager | Both ProScan and OptiScan series may be used with Micromanager. | Software | Download | ||
| Z Encoder Bracket Installation for Nikon TE200 and TE300 | Mounting the Z axis encoder probe and Universal Mounting bracket to Nikon TE 200/300. | Focus Mechanisms | Download | ||
| Z Encoder Bracket Installation Instructions | For Leica DMIR, Nikon TE200/300/2000, Nikon 80i, Olympus IX50/70, IX51/71, Zeiss Axiovert/Axio Observer. | Focus Mechanisms | Download | ||
| Z Encoder Installation for Olympus AX70/BX40/BX60 | Mounting the Z Encode Probe H394 on to Evident/Olympus microscopes. | Focus Mechanisms | Download | ||
| Z Encoder Installation for Olympus IX51 and IX71 | Installing an H122KBIX onto Evident/Olympus IX51 and IX71 microscopes. | Focus Mechanisms | Download | ||
| Z Encoder Probe Mounting Instructions onto a Nikon 80i | Guide for installing a Z encoder probe on a Nikon 80i microscope. | Focus Mechanisms | Download |
最新动态
活动预告
新型紧凑型单轴控制器,以高性价比实现优异性能
Prior Scientific has launched the ES12ZETTL, a compact single-axis stepper motor controller designed to simplify control of motorized focus axes, filter wheels, filter turrets,…
阅读文章显微镜与精密定位术语表 术语 : 定义及行业指南
显微镜与精密定位术语表 术语 : 定义及行业指南 27.07.26 本词汇表对自动化显微镜系统中使用的关键概念、组件和性能指标进行了清晰的定义,涵盖范围从电动载物台和运动控制器到荧光成像及纳米级定位。无论您是在制定新系统的技术规格、集成运动技术,还是优化成像工作流程,这些定义都能为您提供实用的参考,帮助您理解支撑现代科学和工业成像应用的基础术语。 阿贝误差 阿贝误差是指当测量轴与运动轨迹发生偏移时产生的定位误差。例如,某些电动载物台的驱动装置位于边缘,而测量轴则位于中心。无论载物台制造得多么精密,在远离运动源的位置进行测量,都会导致因机械误差引起的微小旋转被放大,从而产生更大的测量误差。 正如恩斯特·阿贝本人所言:“在测量特定点的位移时,仅让探针轴线与运动方向平行是不够的,该轴线还应与该点对齐(穿过该点)。” 相应的计算公式为: ε=hsinθ 其中 ε 位置误差(由此产生的测量误差) h 阿贝偏移量(测量点与目标点之间的距离) θ 角度误差(与目标角度的偏差) 暗场显微镜 暗场显微镜是一种光学成像技术,通过使用不会直接进入物镜的光线照射样品来增强对比度。仅收集由样本内部结构散射的光线,从而使样品在深色背景上显得明亮。这种方法对于观察透明或低对比度的样本特别有用,因为使用明场显微镜可能难以观察这些样本。自动暗场成像系统依赖于精确的载物台定位和对焦控制,以在大型扫描区域内保持图像的一致性。 编码器 编码器是一种用于测量运动系统内位置、速度或位移的传感器。编码器可分为光学式、磁性式或电容式,并向运动控制器提供高分辨率反馈。在精密定位和自动化显微镜领域,编码器可实现载物台的精确定位,支持闭环控制,并确保扫描过程的可重复性。在需要纳米级精确反馈的纳米定位应用中,高分辨率编码器尤为关键。…
阅读应用纪要Neuroscience 2026
Neuroscience 2026 14 – 18 November 2026 Prior Scientific will be exhibiting at Neuroscience 2026 in Washington, DC. We look forward to seeing you there!
查看活动
